Forum

Notifications
Clear all

No power

10 Posts
5 Users
0 Likes
3,563 Views
Posts: 6
Topic starter
(@rob-w)
Active Member
Joined: 3 years ago

Hi guys. Ive had my TC for just over a year and it was about a year old when I bought it. It was about two weeks from last time I used it I went to have a ride and the power button wasnt flashing. I thought the battery must have gone flat although it had been charged. After charging the battery which didnt take long there was still no power showing and it doesnt respond to the remote control. Has anyone any ideas please. The circuit breaker is on and thers no signs of a fuse anywhere

9 Replies
Oscar
Posts: 280
Admin
(@oscar)
Reputable Member
Joined: 6 years ago

probably faulty battery, if you can let it check by your own dealer.

Reply
5 Replies
(@rob-w)
Joined: 3 years ago

Active Member
Posts: 6

@oscar Hi Thanks for the reply. However I have 69.8 volts in the battery. And the way it happened I was quite sure the battery was ok. It was charged only about two weeks previously and when I came to use the bike there was no power so the first thing I did was connect the charger. It charged for about 30 minutes or so then the charger light turned red but still no power anywhere. Ive had a look and can see only four components but I don't know what each one does. I was hoping to find a blown fuse but of course I found there isn't any apart from the trip switch. Im guessing one of the four components has gone faulty although Ive no idea how to check them

Reply
 LHK
(@lhk)
Joined: 4 years ago

Estimable Member
Posts: 127

@rob-w

Have you tried changing the battery in key fob at all? Or trying the spare fob?

Reply
(@rob-w)
Joined: 3 years ago

Active Member
Posts: 6

@lhk Thanks for replying. The light on the power button on the bike is not lighting up or flashing although Im getting a reading in various connections on the bike from the positive on the battery.

Reply
 LHK
(@lhk)
Joined: 4 years ago

Estimable Member
Posts: 127

@rob-w

im guessing no connection via the app either?

Reply
(@rob-w)
Joined: 3 years ago

Active Member
Posts: 6

@lhk

I downloaded the app a while ago but it says I need to scan a barcode to connect with the bike but I cant find a barcode anywhere.

Reply
Posts: 16
(@zippy1970)
Eminent Member
Joined: 3 years ago

I have the same problem today. Battery is fine. I made a trip, parked the SC somewhere and when I returned half hour later, I had no power.

Have you been able to solve your problem?

Reply
Posts: 27
(@mmeeettaall)
Eminent Member
Joined: 3 years ago

I think tracking the power by the bike with a multimeter would be a great idea but it would just detect where the power is stopping or some wiring problem.

Reply
Posts: 16
(@zippy1970)
Eminent Member
Joined: 3 years ago

Problem is, I would need a wiring diagram for that. And I have not been able to find one. The OP told me that in his case, it turned out to be a defective alarm module. But I have no idea how to know for sure it's the alarm module before ordering a new one.

Reply